Accessories for the DHC 2000 Welding Kit
 |
||
| 00 Tip | ||
|
|
For very fine work such as Jewelry. The flame is tiny.
|
|
 |
|
|
| 0.5 Tip | ||
|
|
This tip has become popular with car restorers, just for those in-between jobs where the 0 and 1 Tips are OK, but this is just that "little bit easier for some applications
|
|
|
|
|
|
| 1.5 Tip | ||
|
|
Again good for in-between work where some people find the No.1 Tip to small or slow and the No. 2 Tip just a little to large
|
|
|
|
|
| 2.5 Tip | ||
|
|
This and the No 3 tip (in Kits) are for the big jobs, e.g..., Engine Blocks, Cylinder Heads, Large Manifolds etc.., and thick materials over 6 mm.
|
|
|
|
|
| Rosebud Heating Tip | ||
|
|
Great for heating large areas and bending thick metal. | |
|
|
|
| Curved Extension | ||
|
|
Great accessory for Plumbers, Exhaust Repairers, or for any job where access behind, around or over the top things is required. Approx. size 15 cm in length with a curve of around 135 degrees at the end where you fit your welding tip.
|
|
|
|
|
| Straight Extension | ||
|
|
For areas where a bit more reach is required, or handy for heavy jobs where you might want to keep your hand away from the radiated heat. Approx. 15 cm in length
|
|
|
|
|
| Aluminum Flux | ||
|
|
Aluminium Welding Flux required for welding Aluminium, it does not stay & bleed from the weld, you just wash it of under water. |
|
|
|
|
| Cast Iron Flux |
||
|
|
Cast Iron Welding Flux required for welding Aluminium, it does not stay & bleed from the weld, you just wash it of under water. |
|
|
|
|
| Instruction Manual | ||
|
|
User Manual for DHC 2000, Henrob 2000, and some Later Model Dillons |
|
|
|
|
| Cobalt Blue Welding Glasses | ||
|
|
Cobalt Glasses eliminate the bright orange/yellow glare associated with some welding applications. Fantastic for Oxy/Acet Aluminium Welding
|
|
| |
|
|
| Filler Rods | ||
|
|
We now sell individual STARTERPAKS of the following TIG Rods. Stainless 316L, Aluminium Extruded 5356 & Aluminium Cast 4043. |
|
|
|
|
| Flashback Arrestors |
||
|
|
Flashback Arrestors (Pair) fit between Hose & Regulators |
|
|
|
|
| Aluminum Flux | ||
|
|
Standard shade 5 Oxy/Acetylene Welding Visor |
|
|
|
|
SAFETYPAK
1 x set of Oxy/Acet. Hoses 5m to fit onto the DHC 2000 handpiece, 1 x set of Check Valves for the handpiece & 1 x set of Flashback Arrestors to fit between the hoses and regulators.
The hoses are especially made for us with the special Export fittings for the Torch at one end and Australian fittings at the Regulator end to comply with Australian safety standards.
COBALT BLUE OXY/ACETEYLENE WELDING VISOR
Great for customers who wear glasses or would like full face protection. Has a double flip-up action (See Photo's). Cobalt Blue lense flips up to reveal clear full face shield underneath. Full face shield can also be lifted up, but its very quick and easy to get full vision when not welding.
The Cobalt Blue lense eliminates the bright orange/yellow glare associated with oxy/acetelyene welding, so you are able to see clearly what you are doing. Excellent for all oxy/acetylene welding, especially Aluminium, Stainless Steel & Cast Iron, where it enables you to see right into the weld.
-
Flashback Arrestors
Flashback Arrestors
-
Flashback Arrestors
Flashback Arrestors
-
Acetylene Welding Visor
Acetylene Welding Visor
-
TIG Rods
TIG Rods
http://www.amweld.com.au/accessories.html#sigProGalleriaefcb957261